Troubleshooting - Dual DTJ 301 USB Manuel D'utilisation

Troubleshooting

If the unit does not function as intended, perform checks
using the following tables.
If the malfunction cannot be fixed even after these
checks, please contact the manufacturer.
Problems with the unit
Symptom Possible cause/remedy
The tone arm skips The record player is not sitting
grooves, slides over horizontally. Put the record player
the record or does not on a horizontal base support.
move The record is dirty or scratched.
Clean the record with a record
cleaner or play a different record.
The stylus pressure of the tone arm
may be too low. Adjust the stylus
pressure.
The stylus may be defective. If
necessary, change the stylus.
Check the antiskating and readjust it
if necessary.
Symptom
Poor tone quality, loud static
noise, sound dropouts etc.
The speed is incorrect.
The sound is too quiet or loud
and distorted.
No sound via computer
speakers.
Troubleshooting
Possible cause/remedy
The stylus is dirty or worn.
Clean the stylus with a brush
or replace it.
The record is dirty or dusty.
Clean the record with a
record cleaner.
Adjust the speed according to
the specification on the
record. (33 rpm or 45 rpm)
The record player is not
connected to the correct
input.
(see page 15)
Check software settings, see
p. 21
25