Troubleshooting - Dual DT 210 USB Mode D'emploi

Troubleshooting

Troubleshooting
If the unit does not function as intended, perform checks
using the following tables.
If the malfunction cannot be fixed even after these
checks, please contact the manufacturer.
Problems with the unit
Symptom
The tone arm skips grooves,
slides over the record or does
not move
18
Possible cause/remedy
The record player is not
sitting horizontally. Put the
record player on a horizontal
base support.
The record is dirty or
scratched. Clean the record
with a record cleaner or play
a different record.
Symptom
Poor tone quality, loud static
noise, sound dropouts etc.
The speed is incorrect.
The sound drones.
The sound is too quiet or loud
and distorted.
It is not possible to record
using the recording software
Possible cause/remedy
The stylus is dirty or worn.
Clean the stylus with a brush
or replace it.
The record is dirty or dusty.
Clean the record with a
record cleaner.
Adjust the speed according to
the specification on the
record. (33 rpm or 45 rpm)
The drive belt is too loose and
must be changed.
The record player is not
connected to the correct
input.
(see page 12)
Perform a computer system
restore (via "Programs",
"Accessories", "System
Tools").