Setup - Dual DT 210 USB Mode D'emploi

Masquer les pouces Voir aussi pour DT 210 USB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety and setting up the record player
checked by a specialist before starting to use it again.
Otherwise you are at risk of receiving an electric shock!
Do not open the housing. Otherwise you are at risk of
receiving an electric shock!
Never attempt to repair a defective unit yourself.
Always contact one of our customer service locations.
Never open the unit under any circumstances - this
should only be undertaken by a specialist.
Foreign material, e.g. needles, coins, etc., should not
be allowed to enter the unit.
No open flames, such as burning candles, are
permitted to sit on the unit.
Never let children use this unit unattended.
Always leave maintenance tasks to a qualified
technician. Otherwise you put yourself and others in
danger.
Use only appropriate cleaning agents (antistatic) to
clean the unit and the records. These are available in
an accessories store.

Setup

The record player must be set up only on a sturdy
horizontal, vibration-free surface.
Do not set up the unit in the vicinity of heat sources,
such as radiators. Avoid direct sunlight and excessively
dusty places.
You should only operate the unit when it is positioned
horizontally.
6
Keep the unit away from devices that produce strong
magnet fields.
Do not place any heavy objects on the unit.
If you bring the record player from a cold into a warm
environment, moisture may form on the inside of the
unit. In this case, wait about an hour before you operate
it.
Lay the mains cable in such a way that no one can trip
over it.
Fully insert the mains plug into the socket.
Use a suitable, easily accessible mains connection and
avoid using multiple sockets!
Do not touch the mains plug with wet hands—risk of
electric shock!
In the event of malfunctions or smoke and odour coming
from the housing remove the mains plug from the socket
immediately!
Before a thunderstorm breaks, pull the mains plug.
If the unit is not going to be used for a prolonged period,
e.g. in the event of a long trip, remove the mains plug
from the socket.

Publicité

Table des Matières
loading

Table des Matières