Installing Another Pickup System - Dual DTJ 301 USB Manuel D'utilisation

How to clean the record player

Installing another pickup system

Before installation, read the manual from the
manufacturer of the pickup system.
For the installation, fit the stylus protection to protect
the stylus tip from damage.
Connect the connection wires to the connecting pins
of the pickup system.
The connections of most systems are colour-coded.
Connect each connection wire to the connecting pin
of the same colour.
24
White (L+): left channel, positive pole
Blue (L-): left channel, negative pole
Red (R+): right channel, positive pole
Green (R-): right channel, negative pole
Fasten the pickup system to the tone arm head
using the screws provided.