Fitting The Cim Module - Grundfos MAGNA3 65-XX Notice D'installation Et De Fonctionnement

18.3 Fitting the CIM module

Warning
Before fitting the module, switch off the power supply. Make sure that the power supply cannot be accidentally
switched on.
Step Action
1 Remove the front cover from the control box.
2 Fit the CIM module as illustrated and click it on.
Fit and tighten the screw holding the CIM module and
3
secure the earth connection.
For connection to fieldbus networks, see separate
4 installation and operating instructions for the desired CIM
module.
Illustration
45