Samsung NV51M9770S Serie Manuel D'utilisation page 48

Operating the oven
Smart Control
To use the oven's Smart Control feature, you must download the Samsung Connect
app to a mobile device. Functions that can be operated using Samsung Connect
app may not work smoothly if communication conditions are poor or the oven is
installed in a place with a weak Wi-Fi signal.
Please refer to the following table for the main functions that can be operated
from the app.
When Smart Control on the Monitoring (Oven, Probe), Oven off
oven is off.
Monitoring (Oven, Probe), Oven start, Oven off,
When Smart Control on the
oven is on. Error check
How to connect the oven
1. Download and open the Samsung Connect app on your smart device.
2. Follow the app's on-screen instructions to connect your oven.
Once the process is complete, the connected
3.
displays and the app will confirm you are connected.
4. If the connection icon does not turn on, follow the instruction in the app to
reconnect.
To start the oven remotely
Tap Settings > Smart Control, and then tap ON in the right screen.
48 English
NV51M9770SM_AA_DG68-00997A-00_EN+MES+CFR.indb 48
When Smart Control is on you can:
•
•
•
•
Important: Self Clean mode cannot be started remotely.
•
•
•
icon located on your oven
Easy connection
Easy connection enables you to easily configure the network settings including the
authentication procedure.
Remotely change oven settings (mode, time, temperature) using your mobile
device.
Remotely start the oven.
Remotely turn off the oven.
Once cooking starts, you can change the cooking time and temperature remotely.
NOTE
NOTE
Opening the oven door or turning the mode knob to other modes will
deactivate Smart Control and prevent you from turning the oven on or
controlling the oven remotely.
If Smart Control is deactivated, you can still monitor the oven's status and turn
the oven off.
When oven cooking is finished or cancelled, Smart Control will be deactivated.
2017-07-25 5:27:27