Starting Your Digital Camera; Camera Mode - Easypix W508 Manuel D'utilisation

batteries. Please refer to the below diagram for correct installation method:
Locate the SD memory card slot, and insert an SD memory card as above, until you feel and hear a
"Click" sound. When the
installed correctly.
Note:
1. After the SD memory is inserted successful, "Move to SD card" will appear on the screen, the
photos you have taken will be stored on the SD memory card.
2. Formatting will delete all data on the SD memory card including protected data.
3. Don't remove the SD card during formatting as this may damage the card and render it
unusable.
4. Download the photos/videos to your PC and delete the photos and videos from your SD Card
in order to continue using your camera.

Starting Your Digital Camera

There are 3 modes on your camera.
Camera Mode: Take still photos
•
Video Mode: Capture video files
Playback Mode: View, print, edit photos and view videos
Power on
Press the Power button once to turn on your camera. The LCD will light up and it will sound a "beep",
this indicates your camera is turned on and ready for use.
Power off
Press the Power button once to turn off your camera. When there is insufficient battery power, your
camera will be off automatically after a moment.

Camera Mode

Taking Photos
After each photo is shot (when the camera returns to icon mode) the numbers of photos left to shoot
at this resolution is displayed on the top right of the LCD screen.
When the camera's memory (photo capacity) is full, the LCD screen will display a message " Card
Full "
Digital Zoom function
Use the T and W buttons to adjust the zoom. The icon
the T button to zoom in on your subject. Push the W button to zoom back out.
Macro shooting
slide the Macro/Far switch to
icon appears on the LCD screen, it indicates the macro shooting is on.
icon appears on the LCD screen this indicates that your SD card is
position which is on the left side of the camera, until
5
will show on your LCD screen. Press