Playback Mode - Easypix W508 Manuel D'utilisation

Resolution:
1. Enter into MENU, and press Up/Down button to select"
Resolution".
2. Press OK button, and then press Up/Down button to
select the resolution, VGA , QVGA
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.
White Balance :
1. Enter into MENU, and press Up/Down button to select "
White Balance".
2. Press OK button, and then press Up/Down button to
select white balance, Auto / Daylight / Cloudy /
Tungsten / Fluorescent
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.
Exposure :
1. Enter into MENU, and press Up/Down button to select "
Exposure".
2. Press OK button , and then press Up/Down button to
select Exposure, -2.0 , -5/3 , -4/3 , -1.0 , -2/3 , -1/3 ,
+0.0 , +1/3 , +2/3 , +1.0 , +4/3 , +5/3 , +2.0
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.

Playback Mode

Under Camera mode, please press Mode Button twice
quickly to enter into Playback Mode.
Press W Button to enter into Photo Mode, and press
Up/Down/ Left/ Right button to select the photo you would
like to view. After selection, please press OK button to view
the photo.
When viewing the photo, you can press T Button to zoom in
the photo, and press Up/Down/ Left/ Right button to adjust
the viewing angle.
9