Télécharger Imprimer la page

Starting Your Camera; Jpg(Camera Mode) - Easypix Octonauts Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
easypix
1.
Limited internal memory is provided for testing. The image will be lost
when the power is off. Please insert the memory card to save the
photo first before power off.
2.
An external memory card is required for normal use; your camera
supports any compatible Micro SD memory card.
3.
"Card inserted, change to SD card" will be shown on the screen when
you insert the card, indicating that photos will be stored in the memory
card.
4.
When you take out the memory card, "Card removed, change to Internal
RAM" will be appeared on the LCD screen, now you can only take 1
photo.

Starting Your Camera

Press and hold the Power button to turn on your camera, the LCD screen will
be light up; this will confirm that your camera is on and ready for use.
Press and hold the Power button about 3 seconds to power off your camera.
There are JPG (Camera Mode), AVI (Video Mode), and Play back for
selection.

JPG(Camera Mode):

Taking photos
Power on your camera, the default mode is JPG (camera mode).
Hold the camera steady and compose your object with LCD screen. Press
Shutter button, a moment later, one photo is taken.
Note: When the internal memory is full, the LCD screen will display"Memory
Full – Insert a SD card to transfer and take more photos! ". So, please insert a
SD when you use the camera.
Flash
Your camera has a flash function enables you to take photos when the light
condition is not good.
Press Left button, until the icon
turned on, press Left button until the icon
eye reduction function is on. Press Left button until you see icon
on the LCD screen the flash is forced on. Press Left button until the
display on the LCD, it means the flash function is off.
Note: "Low Power" will show on the LCD, if you change flash function when
the battery power is insufficient. Now please reinstall new batteries for flash
function.
Digital Zoom function
You can magnify your subject by using the digital zoom. Use the T and W
buttons to adjust the zoom up to 8X. Press the T button to zoom in on your
will appear on the LCD, the auto flash is
will show on the LCD, the red
6
English
appear
icon

Publicité

loading