Installing Sd Memory Card; Starting Your Camera; Camera Mode; Taking Photos - Easypix S300 Mode D'emploi

Installing SD Memory Card

Your camera has a memory card slot that enables you to insert any "SD" compatible memory card.
Adding a memory card will allow you to increase the capacity of your camera before you have to
transfer photos to PC. Installing the SD memory card as below:
1. Locate the Memory Card slot.
2. Insert the Memory card into the slot as correct direction. (look on the photos as below)
3. Push the card in until you feel it "click" into position. The top of the card should be flushed with
the surface of the camera. An icon
camera.
4. Once an external memory card is inserted in the camera all the images taken will be stored on
the external memory card.
Note:
1. Limited internal memory is provided for test images. The image will be deleted when
camera power is turned off. Please download the images before power off .SD memory
card is required for normal use.
2. An external memory card is required for normal use; your camera supports any compatible
SD memory card.
3. "Card inserted, change to SD card" will show on the screen when you inserted the card
indicating that photos will be store in the SD memory card, reversely, "Card removed, change
to internal memory" will appear on the LCD screen when you take out the card.
4. If there are photos in the internal memory when you insert the card to your camera, "copy
SDRAM file to your card, please wait..." will show on the screen.
5. When you take out the SD memory card, "Card removed, change to Internal RAM" will be
appeared on the LCD screen, now you can only take 1 test photo.

Starting Your Camera

Press and hold the Power button to turn on your camera, the LCD screen will be light up; This will
confirm that your camera is on and ready for use.
Press and hold the Power button about 3 seconds to power off your camera.

Camera Mode

1. Press Menu button.
2. Press Right/Left button to select Mode.
3. Press Shutter button.
4. Press Right/Left button to select SINGLE
5. Press Shutter button to confirm. Now you are in camera mode (default).

Taking photos

Power on your camera, the default mode is camera mode.
Hold the camera steady and compose your object with LCD screen. Press Shutter button, a
moment later, one photo is taken.
Note: When the internal memory is full, the LCD screen will display "Memory Full! Insert a SD
Memory Card to Transfer and Take More Photos!" If you attempt to take videos when camera
internal memory is full, the camera will beep continuously. Now please download test photo to your
will appear on the LCD screen after you turn on your
5