A Quick Look At Your Camera; Preparing Your Camera For Use - Easypix S300 Mode D'emploi

A Quick Look at Your Camera

Preparing Your Camera for Use

Battery Installation
Your camera requires 2 AAA batteries. Insert the battery into the
camera as following description:
1. Slide and open the battery compartment.
2. Please make sure that the correct battery is inserted with
the correct polarity facing up.
3. Close battery door.
When the "No Power" is displaying on the LCD, it indicates your
camera has insufficient battery lever and it will be off, you need
to download photos to your PC if there is no SD card inserted in.
Note: 1. if you don't intend to use your camera for an extended
period, please remove the batteries to avoid battery leakage and
corrosion.
2. Please don't remove the battery away or power off your camera at will, otherwise the test
photo in your Digital Camera will be lost if without SD memory card, so please download your test
photo to PC as soon as possible.
3. Do not mix old and new batteries.
4. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium metal
hydride) batteries.
4