Shimano Steps EP800 Série Mode D'emploi page 49

INSTALLING THE DRIVE UNIT AND PERIPHERAL PARTS
Installing the drive unit
(3) Tighten the mounting screw on the left side of the frame.
(1) Mounting hole (2)
Right side
Front
10 - 12.5 N·m
Drive unit mounting screw (M8)
(3)
Left side
10 - 12.5 N·m
Drive unit mounting screw (M8)
Drive unit
Rear
TECH TIPS
• Drive unit mounting screws (M8) are not included with SHIMANO products. Use
the screws supplied by the bicycle manufacturer.
27