Hornbach 6145082 Manuel D'installation Et De L'utilisateur page 103

1
Assemble feet and poles
Place the feet parts 5 crosswise
and attach the bottom part of
the stand poles with the sup-
plied screws (M8x20). Then
slide the stand poles 6 over the
upright stud.
Place the 8 precast concrete
slabs as counterweights on
the two feet (four on each) to
stop the awning from tipping
over. The concrete slabs should
measure approximately 43 cm
in diameter, have a thickness of
≤ 5 cm and a weight of 25 kg
each.
ENGLISH | 103