Gima CMS-M Notice D'utilisation page 35

35
Choose the option which need change for setting, each move of wheel key,
the data will raise or descend for one time accordingly. After setting, press
the wheel key down to save and exit the option.
Number Function
1 SpO
2 SpO
3 PR alarm high-limit
4 PR alarm low-limit
5 Exit
3) The alarm state setting
Choose "Alarm sound" option, and change the state:choose "On" to open
the alarm and choose "Off" to close the alarm. After setting,press the wheel
key down to save and exit the option.
4) Pulse sound setting
Choose "Pulse sound" option, and change the state:choose "On" to open the
alarm and choose "Off" to close the alarm. After setting,press the wheel key
down to save and exit the option.
5) Enter monitor interface
Choose "Monitor" option,change the state:choose "On", enter monitor interface
after exiting menu as Fig. 4-5; choose "Off", exit monitor interface after exiting
menu.
a
Fig. 4-4 Alarm setting
alarm high-limit
2
alarm low-limit
2
ENGLISH
Explaining
Setting range: 0~100, default 99 (Unit: %)
Setting range: 0~100, default 85 (Unit: %)
Setting range: 0~254, default 120 (Unit: bpm)
Setting range: 0~254, default 40( Unit: bpm)
Exit alarm setting menu
b