Units Installation - Carrier AquaSnap 30RB Manuel D'installation

Units installation

Installation
base so that abnormal sound does not generate.
There is a pre-cut part that can be removed for running wires.
Do not remove the unit front panel for easier drilling of the
Operation in cooling
4 30RB
OUTDOOR UNIT
weight and minimize vibration transmission.
If the unit is installed in areas where heavy snowfalls
may occur, it is necessary to raise its level at least 200
mm above the usual snow level.
If the outdoor unit is installed in a very windy place, protect
the cable protective bush supplied with the unit for cable
protection.
For correct unit installation use the dimension indicated.
A- Outdoor air temperature (°C)
B- Outlet water temperature (°C)