Festo HGPP A Série Notice D'utilisation page 19

HGPP-...-A
Compare the limit values in these operat-
S
ing instructions with your current applica-
tion (e.g. for pressures, forces, torques,
masses, speeds, temperatures).
Take into account the ambient conditions
S
at your location.
Make sure that there is a correctly pre-
S
pared supply of compressed air.
Please observe the national and/or local
S
technical regulations for your location.
Remove the packing.
S
The packing is intended for recycling pur-
poses.
Use dry and non-lubricated compressed
S
air for the entire service life of the prod-
uct.
An intermediate change to lubricated
compressed air will ruin the service life
lubrication of the product.
Pressurize the complete system slowly
S
(e.g. with a safety start-up valve of type
HEL-... or HEM-...).
Uncontrolled movements of the actuators
will not then occur.
Use the product in its original condition
S
without undertaking any modifications.
Please observe the warnings and instruc-
S
tions on the product and in these operat-
ing instructions.
Festo HGPP-...-A 0110a English
Fig. 4
LF-... LR-...
Fig. 5
Fig. 6
Fig. 7
19