Maintenance And Care; Paper Grease Filter - AEG DE3161-ML Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Maintenance and Care

• Before performing any maintenance operation, isolate the
hood from the electrical supply by switching off at the
connector and removing the connector fuse.
Or if the appliance has been connected through a plug and
socket, then the plug must be removed from the socket.

Paper grease filter

• The purpose of the grease filters is to absorb grease particles which
form during cooking and it must always be used, either in the
external evacuation or internal recycling function.
The paper grease filter is very thin (approx. 1 mm) and positioned
on the inside of its related support grille.
The filter should be changed once a month.
• The grille should be cleaned with luke warm water and non-abrasive
detergent when you change the filter.
• The grease filter can be ordered from your local Service Force
Centre.
Opening the grille
Open the latch and remove the grille downwards. Fig. 3
Removing the filter
Remove the stops to take out the filter. Fig. 3
• Clean the inner housing using a hand hot solution only(never use
caustic detergents, abrasive powders or brushes).
Fig. 3
55

Publicité

Table des Matières
loading

Table des Matières