WAGNER PROSPRAY 3.25 Mode D'emploi page 33

ps 3.25
1 SAFeTy ReGuLATIoNS FoR AIRLeSS
SPRAyING _____________________________ 34
1.1 Explanation of symbols used ____________________34
1.2 Electric safety ________________________________38
1.3 Electrostatic charging
(formation of sparks or flames) __________________38
2 GeNeRAL VIeW oF APPLIcATIoN _________ 39
2.1 Application __________________________________39
2.2 Coating materials _____________________________39
3 deScRIPTIoN oF uNIT __________________ 40
3.1 Airless process _______________________________40
3.2 Functioning of the unit ________________________40
3.3 Technical data _______________________________40
3.4 Legend for explanatory diagram PS 3.25 __________41
3.5 Explanatory diagram PS 3.25 ____________________41
3.6 Transportation _______________________________42
3.7 Transportation in vehicle _______________________42
4 STARTING oPeRATIoN __________________ 42
4.1 High-pressure hose, spray gun and separating oil ___42
4.2 Control panel indicators _______________________43
4.3 Pressure control knob settings __________________43
4.4 Connection to the mains network _______________44
4.5 Cleaning preserving agent when
starting-up of operation initially _________________44
4.6 Taking the unit into operation with coating material 44
4.7 Digital Electronic Spray Control (DESC) ___________45
5 SPRAyING TecHNIque __________________ 47
6 HANdLING THe HIGH-PReSSuRe HoSe ____ 48
7 INTeRRuPTIoN oF WoRK ________________ 48
8 cLeANING THe uNIT (SHuTTING doWN) __ 49
8.1 Cleaning unit from outside _____________________49
8.2 Suction filter _________________________________49
8.3 Cleaning the high-pressure filter ________________50
8.4 Cleaning Airless spray gun _____________________50
9 Remedy IN cASe oF FAuLTS _____________ 51
10 SeRVIcING _____________________________ 52
10.1 General servicing _____________________________52
10.2 High-pressure hose ___________________________52
11 RePAIRS AT THe uNIT ___________________ 52
11.1 Relief valve __________________________________52
11.2 Inlet and outlet valve __________________________53
11.3 Packings ____________________________________54
11.4 PS 3.25 connection diagram ____________________55
11.5 Digital Electronic Spray Control (DESC)
Error Messages _______________________________55
12 APPeNdIx _____________________________ 56
12.1 Selection of tip _______________________________56
12.2 Servicing and cleaning of Airless hard-metal tips ___56
12.3 Spray gun accessories _________________________57
12.4 Airless tip table ____________________________ 58/59
12.5 TempSpray __________________________________60
12.6 Pump-Runner ________________________________61
AcceSSoRIeS FoR PRoSPRAy 3.25 _______ 122/123
Spare parts list for main assembly ________________ 124/125
Spare parts list for the fluid section _______________ 126/127
Spare parts list for drive assembly ___________________128
Spare parts list of frame ____________________________129
Spare parts list for suction system of stand _____________130
Spare parts list of upright cart assembly _______________131
ImPoRTANT NoTeS oN PRoducT LIABILITy __ 133
3+2 yeARS GuARANTee FoR PRoFeSSIoNAL
FINISHING _________________________________ 133
SALeS ANd SeRVIce comPANIeS ________ 139/140
cOntents
33