Baumer CleverLevel LBFS Manuel De Mise En Service page 8

CleverLevel
Example of mounting with weld-in sleeve ZPW3-321
Example of mounting with weld-in sleeve ZPW3-326 or ZPW3-327
170°
5°
6. Approvals
The EHEDG certificate is only valid in connection with the appropriate installation
parts. These are marked with the "EHEDG Certified" logo.
The 3-A Sanitary Standard requirements are only met with the appropriate
installation parts. These are marked with the 3-A logo.
Approved for explosion hazard areas when installed as specified. For barriers,
Baumer recommends: PROFSI3-B25100-ALG-LS.
Approved by Underwriter Laboratories (UL) for use in the USA and Canada as an
industrial control device.
Certified by DNV GL for ships and offshore platforms.
WHG
WHG certified for leakage and overfill protection. All documentation must be available
at the place of use and can be found on the product page on www.baumer.com
Approved as an electronic device for railway applications.
For more information about approvals and certification, please see the product page on www.baumer.com.
8 / 48
Level measurement
® LBFS
Point level detection
1
1
1
2
5°
Operating Instructions
1 ZPW3-321
2 Leakage hole
5°
190°
5°
www.baumer.com