Baumer CleverLevel LBFS Manuel De Mise En Service page 5

1
Fig. 4. Mounting of extended sensors
5.1 Installation for industrial applications
DANGER
Risk of injury from hazardous medium
Wear protective equipment for hazardous media (such as acids, alkalis).
f
„
Empty vessel and pipelines before mounting.
f
„
1
2
www.baumer.com
2
3
PTFE
Operating Instructions
Level measurement
CleverLevel
Point level detection
1 Limit level: Mounting with a tube (version 5)
2 Overfill protection (Type K, L)
3 Pasty or powdered media
limit level (version K, L)
Dip length:
Type K: 82 mm (fixed)
„ „
Type L: 15...228 mm (adjustable)
„ „
The adjustable version L allows bridging across
tank insulation.
In pasty or powdered media, the greater dip depth
renders the sensor less susceptible to caking.
LBFS with the following process connections:
G 1/2 A ISO 228-1 BSC (BCID G07)
„ „
G 3/4 A ISO 228-1 (BCID G10)
„ „
G 1 A ISO 228-1 (BCID G11)
„ „
1/2-14 NPT (BCID N02)
„ „
3/4-14 NPT (BCID N03)
„ „
9 Vessel and pipelines are free of media.
Seal thread on sensor with Teflon tape (PTFE).
f
„
Screw in sensor.
f „
Tightening torque G xx A: 30 Nm max.
Tightening torque xx-14 NPT: 20 Nm max.
® LBFS
5 / 48