Siemens sitrans PROBE LU Manuel D'utilisation page 10

The handheld programmer
To activate PROGRAM mode, point the handheld programmer at the display from a maximum
distance of 600 mm (2 ft), and press the Mode key
hand-held programmer
max. 600 mm
(2 ft)
Within Program Mode, the handheld programmer has two modes of operation: Navigation and
Edit.
• Press the Mode key
the rightmost digit of the menu number flashes and the PROGRAM icon
• Press Right arrow a second time to change the mode from Navigation to Edit.
• In Edit mode, the PROGRAM icon
PROGRAM Mode Display
SITRANS Probe LU (PROFIBUS PA) continues to monitor In and Out values even when
Note:
the device is in PROGRAM mode.
3
2
1
4
1.
For complete instructions on local programming using the handheld programmer, please see the full
manual.
Page EN-8 SITRANS Probe LU (PROFIBUS PA) – QUICK START MANUAL
1
display
function
keys
to switch from RUN to PROGRAM and enter Navigation Mode:
appears and flashes.
1 – Primary region (displays parameter value)
2 – Menu number region (displays Menu number)
3 – PROGRAM mode icon
4 – Secondary region (displays text label)
.
1 2 3
5 6 7
9 0
C
4
8
numeric keys
is not visible.
7ML19985QV81