Jonsered 500 BAT Manuel De L'utilisateur page 11

How to Mow
1. Start mowing from
the outside edge of
the lawn, mowing
in strips in alternate
directions (N).
2. Mow twice a week
in the growing season, your lawn will
suffer if more that one third of its length
is cut at one time and this may also
result in poor collection.
Please Note:-
Do not overload your Lawnmower
When mowing in long thick grass a first
cut with the cutting height adjusted to its
highest setting, see Cutting Height, will
help reduce motor overload and will help
prevent damage to your lawnmower.
Cutting Height
Adjustment
1. Adjust to the
desired cutting
height by means of
the lever on the
right side of the
mower. (O)
USE - MOWING
N
Clearing ejection chute
1. If the ejection chute gets clogged,
2. Remove the safety
3. Remove the grass
Transport
1. Remove the key to prevent
2. Carefully fold the handle.
3. Avoid damaging the cable and the
O
do the following:
P
key to prevent
unintentional
starting.
collector and clean
the ejection
chute.(P)
unintentional starting.
display.
6 - English