Operation By Remote Control; Battery Replacement (For Remote Control) - Bigben BTLSDOG Mode D'emploi

Operation by remote control

Stand by button: After turning on the speaker (by pressing the power button, which is
located on the back of the speaker), press this button to turn off the light and Bluetooth,
press again to turn on the light and Bluetooth.
1
Press and hold this button to switch off the speaker. You will have to press the power
button on the back of the speaker to turn on it again.
Brightness intensity button: Change the brightness intensity when the light is fixed on
2
one single area.
Light ON/OFF button: Press this button to power the light on and off. Power on is the first
step for all functions on the remote control. Once the color light is on, press the ON/OFF
button again only to turn the lighting on or off. This color light has a memory storage
3
function when the power is not exhausted. The light will stay in the same working mode
or color it was last set to.
Bluetooth function button: press this button to switch to Bluetooth function.
4
5
AUX IN function button: press this button to switch to AUX IN function.
6
USB player function button: press this button to switch to USB player function.
Color selection button: When the light is on, press this button to choose your favorite
7
color as shown on the remote control (six colors).
Color selection button: when the light is on, press this button to choose your favorite
8
colors (Total 7 colors).
9 Music flash button: the light will flash when music is playing.
10
Smooth button: 7 colors scrolling automatically.
White color button: press this button and the speaker will display a white color.
11
Previous button: when the Bluetooth or USB key is connected and the music is on,
12
press this button to select the previous track.
Next button: when the Bluetooth or USB key is connected and the music is on, press
13
this button to select the next track.
Pause and play: when the Bluetooth or USB key is connected and the music is on,
14
press this button to play or pause the music.
Voice - and + : when the Bluetooth or USB key is connected and the music is on, press
15
the "-" to reduce the volume and press "+" to increase the volume.

Battery replacement (for remote control)

• If the remote control fails to activate the light, replace the battery.
• Move the slot beside the battery cover to the right side and the battery cover will pop out. Then take
the battery out and replace it with a new one.
• Pay attention to the polarity of the battery on the cover and the cover direction when installing them
back in the remote control.
- EN 4 -