Nilox FOOLISH DUCATI Mode D'emploi page 11

b. The voice recording process only responds to operations of "Record", "Shutdown" and "VOX Switch" key; if turn on
"VOX Switch" in voice recording, the voice recording will be stopped and the file will be auto saved.
c. The laser icon will be displayed on the top left corner of the preview interface when turning on the function of laser
synchronous shooting, which indicates the system is in this shooting mode. At this time, the laser will be turned on
when starting recording and it will be turned off when stopping recording.
(2) Setting of camera parameter:
a. Single shot: The shooting mode is auto set in single shoot when starting up every time; To press "Shutter" once can
take one photo;
b. Triple Shot: To press "Shutter" once can take three photos continuously;
c. Continuous shoot: Take one photo every 2s/3s/5s/10s/20s/30s, till to press key to stop or the card is full, or the
power is run out;
d. Self shot: Select the self-timer delay time (0s, 5s or 10s);
Press "M" key to return to "Preview" state after selecting; press "Shutter" once, the system will start the timer and
the self-timer indicator twinkles at the end of the delay time and it takes one photo. After finishing the self-timer for
one time, the system will auto recover the shooting mode to single shooting. If the "Self-timer Delay Time" has been
set, but the machine is restarted without pressing "Shutter" key, the machine will auto set the "self-timer Delay Time"
at the state of 0s;
e. Image resolution: select 3M, 5M or 8M;
(3) Setting of system parameter:
a. Beep: Turn on or turn off the key tone;
Note: Voice of photo shooting and video recording cannot be turned off through this item. It only turns off the key
operation voice and there is no switch to turn off voice of photo shooting and video recording in the machine system.
b.
Self lamp: please turn it on or off before self timing "ON"
c.
record the shooting date and time when shooting image and display on the bottom right corner of the file;
d. Loop Coverage: Loop coverage: The video/audio file will be auto saved in segment once every 15 minutes when
setting "Loop Coverage"; and if it is not set, the video/audio file will be auto saved in segment once every 30 minutes.
Note: The current actual segment file is determined by the file size set, but not determined by the true time, that is to say,
the file will be segmented more than 15/30 minutes at a dark environment.
e.
minutes or 10 minutes. In case of no any mission and operation after selecting, the system will start timing and
FOOLISH DUCATI will turn off input and output to enter the standby mode at the end of the time set. If there is any
operation in timing, the system will re-time. If the video recording or shutter is operated in the -15- standby process,
FOOLISH DUCATI will be waked up. The default standby time is 5 minutes when selecting to restore the factory
default;
f. TV output format: NTSC or PAL; the video format outputted to TV can be selected. If the selected format is changed,
please unplug the AV cable and then reinsert it to update the parameters;
g. Format: After confirming that all files recorded are not needed to be saved, all files can be removed by formatting.
Note: lf there is no card inserted, the memory of the machine will be formatted; after inserting card, the system will
Self lamp: please turn it on or off before self timing;
Time display: Please set before using; the machine will auto
Auto standby: Select the auto standby time of 0, 2 minutes, 5
~ 11 ~