Nice Era Mat VS Instructions Et Avertissements Pour L'installation Et L'utilisation page 9

5.10.2 - Procedure performed with an unmemorised transmitter
01. Disconnect power supply from motor.
02. Connect the White and White-black wires to each other.
03. Disconnect power supply from motor.
04. Lastly, perform the procedure indicated in paragraph 5.10.1.
01 02
OFF
Note – When performing the procedure, you can cancel it at any time by keeping the n and t keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
5.11 - Locking and unlocking the memory
This procedure allows you to lock or unlock the memory to prevent accidental memorisation of other transmitters not included in the system.
01. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. Keep the s key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03. Keep the n key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
04. Keep the s and t keys pressed simultaneously and wait for the motor to perform 2 movements. Upon completion, release the keys.
05. • To unlock the memory: Keep the s key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
• To unlock the memory: Keep the t key pressed and wait for the motor to perform 5 movements. Upon completion, release the key.
01
5
sec.
2
04
5
sec.
2
Note – When performing the procedure, you can cancel it at any time by keeping the n and t keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
03
white
ON
white-black
02
5
sec.
3
04
01 02 03
Paragraph 5.10.1
Paragraph 5.10.1
03
5
sec.
05
5
sec.
3
05
5
sec.
5
04 05
THE
END
END
3
THE
END
END
THE
END
END
English – 8