Pairing With Bluetooth Devices - Bose SoundLink Notice D'utilisation

English Tab 2, 10
• When a device is connected,
press to disconnect the device.
The SoundLink
for a paired device to connect.
When the Bluetooth source is selected, and
no device connects within 30 minutes, the
speaker turns itself off.
Mutes sound from the speaker.
Plus increases speaker volume.
Minus decreases speaker volume.
The source indicator on the front
panel flashes once each time the
button is pressed. The indicator
flashes twice when maximum or
minimum volume is reached.
Tab 3, 11 Tab4, 12
®
speaker then waits
Tab 5, 13 Tab 6, 14
Pairing with Bluetooth
Pairing occurs when two Bluetooth devices
communicate with each other and establish a
connection. A record of information about this
connection is then stored in the memory of
each device. Once you pair a device with the
®
SoundLink speaker, you should not have to
pair it again.
®
The SoundLink speaker can pair with up to
six Bluetooth devices. However, it can only
connect to, and play audio from one device at
a time.
To begin pairing with a Bluetooth device
1. With the Bluetooth device and the
®
SoundLink speaker both turned on,
press and hold the Bluetooth button on
the speaker for three seconds to make the
speaker discoverable.
Tab2, 7, 15 Tab 8, 16
O
PERATION
devices
®
15