Model Code - Knick Stratos Evo Série Mode D'emploi

26
Connecting cable for contactless inductive digital transmission of measured signals
(Memosens).
The connecting cable consists of an inductive connector for digital Memosens
sensors (bayonet lock). It allows connecting the ferrule-terminated wires from the
sensor loop of the transmitter. Contactless inductive digital transmission of sig-
nals and energy eliminates the infl uence of humidity, electromagnetic fi elds and
corrosion.
Specifi cations
Material
Cable diameter
Cable
Length
Process temperature
Ingress protection

Model Code

Cable type
Memosens cable
Memosens cable, Ex*
*) Ex-certifi ed, ATEX II IG Ex ia IIC T3/T4/T6
The Type-Examination Certifi cate is enclosed with each Ex sensor.
CA/MS-... Memosens Cable
TPE
6.3 mm
2x2, twisted wire pairs
up to 100 m
–20 °C ... 135° C
IP 68
Cable length
3 m
5 m
10 m
20 m
3 m
5 m
10 m
20 m
Other lengths available on request.
Order code
CA/MS-003NAA
CA/MS-005NAA
CA/MS-010NAA
CA/MS-020NAA
CA/MS-003XAA
CA/MS-005XAA
CA/MS-010XAA
CA/MS-020XAA