Ricatech RMC430 Mode D'emploi page 9

MP3 CD Search by Folder / Album Title
1. While the CD is stopped, press the FIND /
and its name will be shown on the display.
2. Press the FOLDER+ /
3. Press the FORWARD SKIP /
NOTES:
· The Search feature will only work if the MP3 CD has information such as Folder, Artist and Song Titles already stored
on the CD. This information is added at the time the CD is created and cannot be added afterwards.
· You cannot record MP3 CD's with this unit. These can only be created via a Computer or other device with MP3
Encoding/Recording function.
RANDOM PLAY
1. While playing a MP3 CD, press the RANDOM button on the remote control. "RANDOM" will be on the LCD display.
The unit will randomly select songs from the MP3 CD and play them in any order.
2. To cancel Random Playback, press the STOP /
REPEAT PLAYBACK
To repeat a Single Track
1. Select the desired track number and press the REPEAT button once. Then press the PLAY/PAUSE button.
"REPEAT " will show on the display. After it has finished playing, the selected track will play again.
To repeat a complete MP3 CD
1. Press the REPEAT button three times. The display will show "REPEAT ALL". Once the disc has finished playing,
the whole disc will start playing from the beginning again.
2. To turn the Repeat function off, press the REPEAT button again. "REPEAT" will disappear from the LCD display.
PROGRAMMED PLAYBACK
1. Press the PROGRAM BUTTON. "MEMORY", "P - 01" will show on the display and "MEMORY" will flash.
2. Press the FOLDER + or FOLDER – to select an Album.
3. Press the FORWARD SKIP+ BUTTON or the BACKWARD SKIP- BUTTON to select a track.
4. Press the PROGRAM BUTTON again to store the selected track number,
5. Repeat steps 2 and 4 above to program further tracks.
6. Press the STOP BUTTON once to confirm the Program setting, "MEMORY" will stop flashing.
7. Press the PLAY/PAUSE BUTTON to start programmed playback.
8. To erase the programmed sequence, press the STOP BUTTON twice.
Programmed tracks will also be erased when the CD DOOR is opened.
NOTE: A maximum of 70 tracks can be programmed to play in any order.
CD RECORDING OPERATION
Preparation
This unit is designed to record CD-R and CD-RW discs bearing the identification logo "Compact Disc Recordable" or
"CD-Rewritable". If CD's do not conform to this standard, they may not record properly.
NOTICES on CD "Write" or "Rewrite" Operation
Disc Diameter: 8cm and 12cm.
Recommended Media CD-R (Manufacturer CODE): SONY, TDK, MAXELL, FUJI, CMC, MBI, TY, RITEK, PLASMON,
PRODISC, DAXON, SAST, PRINCO, LEADDATA, GIGA, TAROKO, DDT.
Recommended Media CD-RW (Manufacturer CODE):SONY, TDK, MAXELL, FUJI, MCC, MBI, CMC, RICOH,
RITEK,LEADDATA.
Depending on the disc or disc brand, etc., it may not be possible to record to a particular CD-R/CD-RW disc.Try another
disc.
Recording from CD to CD
1. Press the FUNCTION button /
button twice to start to browse the album. The search icon, ALBUM 001
or the FOLDER- / button repeatedly to select the desired album.
or the BACKWARD SKIP /
until " CD LOAD " shows on the display and load a compatible blank CD-R or
buttons to select the desired folder/album.
button.