What To Do If; Environment Concerns - Leonard LAS6060F Notice D'utilisation

Masquer les pouces Voir aussi pour LAS6060F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

18 leonard
3. At the end rub the appliance dry
with a clean cloth.

WHAT TO DO IF...

Problem
You cannot activate the appli-
ance or operate it.
A Sound operates and the ap-
pliance deactivates.
A sound operates when the ap-
pliance is deactivated.
The appliance deactivates.
The residual heat indicator
does not comes on.
The Automatic Heat Up func-
tion does not operate.
You cannot activate outer ring.
The sensor fields become hot.
comes on
and number comes on.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on.

ENVIRONMENT CONCERNS

The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
Possible cause and remedy
• Activate the appliance again and set the heat setting in 10 sec-
onds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device or the Lock operates. See the chapter
Operating instructions.
• There is water or fat stains on the control panel. Clean the con-
trol panel.
You put something on one or more sensor fields. Remove the ob-
ject from the sensor fields.
You put something on the
field.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should be hot, speak to the service cen-
tre.
• There is still residual heat on the cooking zone. Let the cooking
zone become sufficiently cool.
• The highest heat setting is set. The highest heat setting has the
same power as the Automatic Heat Up function.
• You decreased the heat setting from
only increase the heat setting.
Activate the inner ring first.
The cookware is too large or you out it too near to the controls.
Put large cookware on the rear cooking zones if it is necessary.
The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
comes on again, speak to the service cen-
tre.
Make sure, you operated the appliance cor-
rectly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer service
and conditions of guarantee are in the guar-
antee booklet.
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
. Remove object from the sensor
. Start from
and

Publicité

Table des Matières
loading

Table des Matières