Store Settings [Store Settings]; Setting The Nighttime Volume - Panasonic WX-CC411 Mode D'emploi

Store settings [Store Settings]

This function is used to perform operation settings for stores.
w Setting the nighttime volume
w
This function is used to reduce the volume level of the voice
output from the order post speaker. Use this function to
reduce the volume level of the voice output from the order
post to decrease the noise volume at night.
1
On the Settings screen, touch the [Store
Settings] button, and then the [Nighttime
Volume] button.
2
[Nighttime Volume]
Set whether to use the Nighttime Volume using
the [OFF], [ON], or [AUTO] buttons.
OFF:
The volume level of the order post speaker is
unchanged.
ON:
The volume level of the order post speaker is
reduced.
AUTO: The volume level of the voice output from the
order post speaker is reduced automatically
every day, based on the set time to start and
time to end the nighttime volume function.
Default setting: OFF
3
[Level]
Set the voice suppression level.
Set to -20 dB to 0 dB (in steps of 2 dB).
Default setting: 0 dB
4
[Start Time][Ending Time]
When you select "AUTO", set the times to start
and end the Nighttime Volume.
Touch the [Edit] button for the [Start Time] or [Ending
Time] to set the time.
Note
w p When setting the Nighttime Volume spanning two
days, set the time to finish earlier than the time to
start.
5
Touch the [Set] button.
w p The setting for the nighttime volume is entered.
Note
w p When WX-CC412 is used, this setting is applied to
both lane A and lane B.
w p When the nighttime volume setting is enabled, the
ASLC function does not operate regardless of its
setting. For details on the ASLC, refer to "Setting the
DSP" (p.26).
19