Panasonic WX-CC411 Mode D'emploi page 15

Setting the Center Module
4
Press the [T1] button on the All-In-One
Headset or Belt Pack.
The All-In-One Headset or Belt Pack searches for a
Center Module that is in ID registration mode. The
"Connecting center module A" voice prompt will be
heard from the earphone, and the lane indicator will
blink orange.
In the case of the WX-CC412, after lane A registration,
the "Connecting center module B" voice prompt will be
heard, and the lane indicator will blink green.
w p When ID registration has been completed
successfully, the "Registration complete" voice
prompt will be heard from the earphone, and then a
voice prompt for the number of the registered All-In-
One Headset or Belt Pack will be heard. The power
indicator and the lane indicator now stop blinking,
and light up.
After registrating all of the headset IDs, touch the [Stop]
button on the ID registration screen.
ID registration mode for the Center Module is exited. The
power indicator of the All-In-One Headset or Belt Pack
changes from orange to green.
Important
w p When registering the IDs of a multiple number of
All-In-One Headsets or Belt Packs, register the ID
of each unit in sequence. If an attempt is made to
register the IDs of multiple units at the same time, the
IDs may not be registered correctly.
w p During the ID registration process, do not turn off
the power of the All-In-One Headsets or Belt Packs
or remove their batteries. Otherwise, their IDs may
not be registered correctly. If the registration is not
proceeding smoothly, touch the [Stop] button on the
Center Module, exit ID registration mode, and then try
again.
w p When ID registration fails, a "BUU-UU-UU" warning
sounds in the All-In-One Headset or Belt Pack
concerned, and then the "Failed" voice prompt is
heard. If an ID registration has failed, the ID of the
All-In-One Headset or Belt Pack will not be registered
in the Center Module, and the power indicator of the
All-In-One Headset or Belt Pack concerned will blink
in red.
w p The IDs of up to 32 All-In-One Headsets or Belt Packs
can be registered in one Center Module. If an attempt
is made to register IDs for more than 32 units, the IDs
of the headsets not used for the longest time will be
automatically deleted, and then the IDs of the new
units will be registered.
w p It is not possible to register the ID of a wireless
repeater while ID registration mode of the All-In-One
Headsets or Belt Packs is active.
15