Setting The Daylight Saving Time - Panasonic WX-CC411 Mode D'emploi

Setting the Center Module
w Setting the daylight saving time
w
This function is used to set the daylight saving time.
1
On the Settings screen, touch the [Installation
Settings] button, [Date & Time] button, and
then the [Daylight Saving Time] button.
2
[Setup]
Set Daylight Saving Time using the [ON], [OFF],
or [AUTO] buttons.
ON: Set the time to daylight saving time. (Advance
the current time by 1 hour)
OFF: Cancel daylight saving time.
AUTO: Daylight saving time is set based on the set
date and time to start and end (Month, week,
day of the week, time).
Default setting: OFF
If AUTO is selected, you must set the date and time to
start and end Daylight Saving Time. Touch the [Edit]
button to set the date and time to start and end Daylight
Saving Time.
Input the month, day, and hour to start/end Daylight
Saving Time, and then touch the [Enter] button.
Note
*
w p " " appears in the time display during Daylight Saving
Time.
w p Specify [DAY] as the ○th ∆day of the week. If [Last] is
set, the 4th specified day of the week becomes the
subject day, unless there is a 5th specified day of the
week in the month.
w p You cannot set the same date as the date to start and
end daylight saving time.
3
Touch the [Set] button.
w p The daylight saving time setting is updated.
Note
w p After daylight saving time is set, all schedule-related
functions (reminder messages, Store Hours, etc.)
operate based on daylight saving time.
10