Panasonic WX-CC411 Mode D'emploi page 28

Setting the messages [Message]
4
Perform PAGE operation with an All-In-One
Headset or Belt Pack and start recording.
w p When PAGE operation is performed using the All-In-
One Headset or Belt Pack for lane A according to the
directions displayed on the screen, a beep tone is
heard and recording starts.
Note
w p The maximum message recording time is 20 seconds.
When the maximum recording time is reached,
recording stops automatically.
w p All operations other than recording are disabled.
However, recording is interrupted immediately if a
security alert occurs.
w p If you perform PAGE operations using multiple All-
In-One Headsets or Belt Packs, the page voices are
mixed and recorded.
5
Stop recording.
w p To stop recording, stop PAGE operations of all of
the All-In-One Headsets or Belt Packs, or touch the
[Stop] button on the screen.
w p When recording is stopped, the recorded message is
played back automatically by the All-In-One Headset or
Belt Pack for lane A.
Note
w p If you stop recording by touching the [Stop] button on
the screen, the page operation is continued.
6
Register the recorded voice to the message.
w p When automatic playback after recording is finished,
the registration confirmation screen is displayed.
w p To register the recorded voice to the message, touch
the [YES] button. If a recorded message is already
registered to that message number, it is overwritten.
w p To delete the recorded message, touch the [NO]
button.
Note
w p The recorded message is saved in the form of a
G.726 sound source file on the SD card. To play back
with a personal computer, a G.726 codec or playback
software is necessary.
Folder: <The root directory of your SD card>
\PRIVATE\PANA_GRP\PSN\DWCS\MESSAGE
Sound source file name: ○○_MSG∆∆.wav
(○○ is GR: Greeter/ RM: Reminder/ AL: Alert, and ∆∆
is message number 01 to 30)
28