Panasonic WX-CC411 Mode D'emploi page 23

Setting the tandem lane (WX-CC412 only)
1
On the Settings screen, touch the [Store
Settings] button, and then the [Tandem Lane]
button.
2
[Tandem Lane]
Set the tandem lane.
OFF:
Dual lane
ON: Tandem lane
Default setting: OFF
3
[Message]
Select the tandem lane message.
Touch the [Select] button and select the tandem lane
message from the greeter message list.
Default setting: Pull Forward
Note
w p "Pull Forward" is the tandem lane message prepared
in advance. You can select this message even if no
SD card is inserted.
23