Restrictions Relating To Operation Of The Cp; Step 7 Configuration Of The Cp - Siemens SIMATIC NET CP 343-2 Information De Produit

English
13 Restrictions Relating to Operation of the
CP 343-2
Restrictions
D The CP 343-2 / CP 343-2 P has not been released for operation with
the IM 153-3.
D Both write and read access must be in either word or double word for-
mat to even I/O addresses.
Example:
correct:
wrong:
wrong:
D Access to AS-i analog values using data records 140 to 147 and to the
binary values of the B slaves using data record 150 is not possible with
the CPU 318 with a firmware version V1.1.3 or earlier.
14

STEP 7 Configuration of the CP

D
To configure the module CP 343–2 P, STEP 7 version V5.2 or higher is
required.
D If you replace CP 343–2 with CP 343–2 P, then replace the previously
configured CP 342–5 with the new module CP 343–2 P in STEP 7 /
HW Config.
In your user program no changes are necessary.
e–10
L PIW 288
T PQB 288
L PIW 291
Product information CP 343–2 / CP 343–2 P
A5E00053856–04