Siemens SITRANS F FST020 IP65 NEMA 4X Instructions De Service page 12

Installing/Mounting
2.2 Mounting the Transmitter
Pipe Mounting Installation
1. Affix Mounting Plate to standpipe using the U-bolt assemblies.
2. Secure transmitter to Mounting Plate using #8-32 screws, washers and nuts.
3. Refer to Connecting Power (Page 11) and Sensor Installation (Page 25) to complete
Note
Use conduit fittings or cable glands on all cables.
10
installation.
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 03/2012, A5E03086489-05