Product Overview - Honeywell evotouch Installation

ENGLISH
Product overview
The Honeywell evotouch comfort control
system is a programmable zoning controller
with the following key features:
Features
• Large touch-screen display for intuitive
operation by finger.
• Wall or table-top mounting.
Configuration
• Step-by-step configuration procedure
binds the controller to each of the
devices in the system.
• Choice of Guided Configuration,
for simple applications, or Expert
Configuration, for customising the
configuration.
Note: evohome system packs are already
preconfigured (see system pack contents
sheet).
Programmability
• Up to 6 periods per day in each of the 8
zones.
• Holiday mode reduces the temperature
for 1 to 99 days.
• Economy mode reduces the temperature
settings in all zones, to reduce fuel bills.
2
Control
• Wireless control to boiler, radiator
controllers, room sensors, and under
floor heating controllers.
• Independent control of up to 8 zones, to
optimise comfort and minimise energy
usage.
• Optimum Start feature automatically
calculates when to start heating to
achieve the correct temperature.
• Automatic Summer/Winter time change.
Future expansion
• A USB port, for future updates.
Installation
The product is shipped with pre-charged
batteries. However, for maximum time off the
dock, place the product on charge.
Two mounting options are available:
• A wall-mounted dock.
• A table top stand.
When removed from the stand/dock the
evotouch will remain powered for about
2 hours before needing to be replaced for
charging.