Safety Information - Honeywell evotouch Installation

Safety information
Approvals
Conforms to protection requirements of the
following directives:
EMC: 2004/108/EC
LVD: 2006/95/EC
R&TTE: 1995/5/EC
EMC compliance considerations
Refer to Code of Practice standards
EN61000-5-1 and -2 for guidance.
Caution: Isolate power supply and make
safe before wiring the unit to prevent electric
shock and equipment damage. Installation
should be carried out by a competent
person.
Location of device
evotouch should be installed in an open
space for best performance as it is a radio
frequency device. Leave at least 30cm
distance from any metal objects including
wall boxes and at least 1 metre from any
other electrical equipment eg. radio, TV, PC
etc. Do not mount onto metal wall boxes.
For the best temperature control
performance evotouch should not be placed
near heat or cool sources (e.g. cooker, lamp,
radiator, doorways, windows).
Disclaimer
This product and its associated
documentation and packaging are
protected by various intellectual property
rights belonging to Honeywell Inc and its
subsidiaries and existing under the laws
of the UK and other countries. These
intellectual and property rights may include
patent applications, registered designs,
unregistered designs, registered trade marks,
unregistered trade marks and copyrights.
Honeywell reserves the right to modify
this document, product and functionality
12
without notice. This document replaces any
previously issued instructions and is only
applicable to the product(s) described.
This product has been designed for
applications as described within this
document. For use outside of the scope
as described herein, refer to Honeywell
for guidance. Honeywell cannot be held
responsible for misapplication of the
product(s) described within this document.
PLEASE RESPECT YOUR ENVIRONMENT!
Take care to dispose of this product and any
packaging or literature in an appropriate way.
WEEE directive 2002/96/EC
Waste Electrical and Electronic
Equipment directive
• At the end of the product life dispose
of the packaging and product in a
corresponding recycling centre.
• Do not dispose of the unit with the usual
domestic refuse.
• Do not burn the product.
• Remove the batteries.
• Dispose of the batteries according to the
local statutory requirements and not with
the usual domestic refuse.
Manufactured for and on behalf of the
Environmental and Combustion Controls
Division of Honeywell Technologies Sàrl,
ACS-ECC EMEA, Z.A. La Pièce 16, 1180
Rolle, Switzerland by its Authorised
Representative Honeywell Inc.
Honeywell Control Systems Ltd.
Arlington Business Park,
Bracknell, Berkshire
RG12 1EB
Technical Help Desk: 08457 678999
www.honeywelluk.com