Installing The Heki3 Plus - Dometic Heki 3 Plus Instructions De Montage Et De Service

Heki3 Plus
7

Installing the Heki3 Plus

!
WARNING! Beware of injury
Disconnect the vehicle power supply before you begin and make sure it
cannot be restarted.
A
NOTICE!
Make sure that you do not damage any cables during installation.
See fig. 4
If you would like to connect the lighting:
➤ Lay the power supply line in the middle on the long side, where the crank should
go.
Supplementary to fig. 5
The scope of delivery includes a mounting set, which is suitable for a roof thickness
of 25 – 32 mm. For roof thicknesses of 33 – 60 mm, you need to have a suitable
mounting set (see table).
➤ Measure your roof thickness W.
➤ Choose a suitable mounting set:
Roof thickness
25 – 32 mm
33 – 39 mm
39 – 46 mm
46 – 53 mm
53 – 60 mm
See fig. 6
➤ Check that the roof light has sufficient space around it (approx. 1 to 2 mm) in the
roof opening.
See fig. 7
➤ Clean the roof opening in the mounting area.
EN
Mounting bracket
colour
Grey
Black
Yellow
Blue
Red
Installing the Heki3 Plus
Screws
∅ 4 x 25 mm
∅ 4 x 32 mm
∅ 4 x 40 mm
∅ 4 x 46 mm
∅ 4 x 52 mm
Ref. no.
Included in the
scope of delivery
9104100245
9104100246
9104100247
9104100248
7