Qlima A 45 Manuel D'utilisation page 57

G
INSTALLATION
1.
2.
3.
4.
Picture 3
5.
G
OPERATION
Picture 4
DESCRIPTION OF THE OPERATING BUTTONS
1.
2.
ATTENTION!
Never use the device with a damaged power
cord, plug, cabinet or control panel. Never
trap the power cord or allow it to come into
contact with sharp edges.
ATTENTION!
Failing to follow the instructions may lead to
nullification of the guarantee on this device.
Remove the back panel. Place both hands on the rounding at the bottom side of the
back panel. Release the back panel and remove it (picture 3).
Remove the filter package (4x) from the unit and remove the plastic packaging mate-
rial.
Place the filter package (4x) back in the unit with the white front filter facing to the
side.
Put the back panel back by first hanging the top edge of the back panel on the two
hooks at the top of the air cleaner and then fixating it by pressing the bottom part of
the back panel.
The device is now ready for use.
• To ensure that it functions properly the filter package must be inserted cor-
rectly and such that the front filter (white side) is positioned towards the outer
side and the active carbon filter (black side) is positioned at the inner side.
• For the device to work correctly the air flow must first go through the front
filter, then through the HEPA filter and then through the active carbon.
1 2
Press to set ventilator capacity / Reset button filter replacement alarm.
On / Off Button (When switching on the unit, the clean air outlet louvre will open au-
tomatically).
3
4
57 57