Appendix 7: Removal Instructions - Empire Comfort Systems Archway 1700 Manuel D'installation Et D'opération

APPENDIx 7: REMOVAL INSTRUCTIONS

For inspecting purposes, the insert may need to be removed. To remove the insert, follow these
instructions:
Unscrew the faceplate fastener (B) holding the faceplate (C) on the insert.
1.
2. Remove faceplate (C) by pulling on it.
3. Remove the blower assembly (D).
4. Remove the three screws securing the pipe connector (A).
5. Unscrew the bolts securing the insert to the floor on each side of the unit (E).
D
B
C
A
E
Page 47