Technical Data; Specifications - Rinnai C199i Manuel D'installation Et D'utilisation

Specifications

Minimum Gas Consumption Btu/h
Maximum Gas Consumption Btu/h
Hot water capacity (Min - Max) *
Temperature Setting (no controller)
Maximum Temp Setting
Minimum Temperature Setting
Weight
Noise level
Electrical Data
By-Pass Control
Gas Supply Pressure
Type of Appliance
Connections
Ignition System
Electric Connections
Water Temperature Control
Water Supply Pressure
Maximum Water Supply Pressure
Remote Control Cable
Energy Star Qualified
Complies with South Coast Air Quality Management District 14 ng/
J or 20 ppm NOx emission levels
* Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.
Minimum activation flow is 0.4 GPM (1.5 L/min).
Our products are continually being updated and improved; therefore, specifications are subject to change without prior notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value listed is for the
purpose of input adjustment.

Technical Data

Normal
Standby
Anti-frost Protection
Max Current
Fuse
Natural Gas
Propane
C199 Manual
C199i
199,000
0.26 - 9.8 GPM
(1.0 - 32 L/min)
120° F (49° C) or 140° F (60° C)
Selectable at 120° F (49° C), at 140° F (60° C), or at 185° F (85° C)
61.7 lb (28 kg)
41 dB
75 W
146 W
Without recirculation pump: 4 A
4.0 - 10.5 inch W.C.
8.0 - 13.5 inch W.C.
Condensing, Tankless, Temperature controlled continuous flow gas
hot water system
Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water
Outlet: 3/4" MNPT
Direct Electronic Ignition
Appliance: AC 120 Volts, 60Hz.
Temperature Controller: DC 12 Volts (Digital)
Simulation Feed forward and Feedback
Minimum Water Pressure: 50 PSI (Recommended 60-80 PSI for
maximum performance)
Non-Polarized Two Core Cable (Minimum 22 AWG)
C199e
15,200
199,000
0.26 - 9.8 GPM
(1.0 - 32 L/min)
98° F (37° C)
52 dB
71 W
2 W
168 W
10 A
Electronic
150 PSI
Yes
Yes
51