LEMI BELLAGIO 1M Notice D'utilisation page 8

6. OPTION ON DEMAND
6.1. Heating
OFF = heating off (led: ON)
ON = heating on (led: ON + LOW)
LOW = low temperature 40° (led: ON + LOW)
HIGH = higher temperature 47° (led: ON + HIGH)
2H = heating is on for 2 hours (LOW or HIGH), then turn
off automatically.
When activated, the led blinks till the end of the se-
cond hour.
You can stop heating in any time pressing OFF button.
Usually, heating stops automatically (LOW or HIGH
temperature) after 1 hour from switch on.
ATTENTION! It is absolutely necessary TURN OFF THE HEATING (OFF) WHEN THE TABLE IS NOT USED
AND AT THE END OF EACH WORKING DAY.
The heating works with the pressure of the body, so we do not feel any sensation of heat if it is not stressed by the
weight of a body. It is recommended to always leave a weight laid (for example towels or magazines) to maintain the
minimum temperature.
6.2. Bluetooth Sound kit
Press the button on the right side of your table in order to activate the Bluetooth. Search for the Blue-
tooth devices with your smartphone and select the preferred track to be played. Sound will come from
two speakers placed in the backrest of the table.
6.3. Kit Chromo
If the table was equipped with chromotherapy strips, consult the
instruction manual for the use of the remote control chrome.
6.4. Easy Move
To facilitate movement and cleaning, use the handle "Easy Move" by pulling
it towards you. The bed will slightly rise and will be easily movable by its ro-
tating wheels. Always restore the handle into its original position at the end
of these operations.
7. INSTRUCTION FOR USE
7.1. Operator
The table is controlled by an operator through the foot control pedal (or the hand control); the operator must position
themselves so as to have complete view of the controlled parts and of the patient.
WARNING! During the functioning of the table the operator should always remain in the vicinity of
the controls; it is forbidden to leave the table unattended during its operation.
8