Emerson IDEAL Mode D'emploi page 13

5. How to Wire Your Ceiling Fan
5.2
Securely connect the Fan Motor White Wire to the
Supply White (neutral) Wire using Wire Connector
(supplied) (Figure 17).
5.3
Securely connect the Fan Motor Black Wire to the
Supply Black (hot) Wire using Wire Connector
(supplied) (Figure 18).
5.4
After connections have been made, turn Wires upward
and carefully push Wires into the Outlet Box, with the
White and Green Wires on one side of the Outlet Box
and position the Black Wires on the other side of the
Outlet Box (Figure 19).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
Figure 17
Figure 18
GREEN
WIRES
WHITE WIRES
Figure 19
13
(Continued)
SUPPLY WHITE
(NEUTRAL)
LISTED WIRE
CONNECTOR
FAN MOTOR
WHITE WIRE
SUPPLY
BLACK
(HOT)
LISTED WIRE
CONNECTOR
FAN MOTOR
BLACK WIRE
BLACK WIRES
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF330