IDC S1 Mode D'emploi page 38

I N S T A L L A T I O N
▷ Place the fixator into the scanner.
The clamp of the fixation plate must engage in the bottom element of the fixator.
E N
Fig. 11 Fixator in the desktop scanner
1 Artex fixator
2 Blade bolt
3 Fixation plate with clamp
▷ Start the vestibular scan by clicking on the
▷ Follow the software instructions.
▷ The software requires a 3-point assignment for the necessary registration of the fixator.
▷ Confirm with
▷ Define at least three corresponding points for registration on the lower-jaw and vestibular scan.
38
OK
.
1
2
3
4
5
4 Spacer plate (optional)
5 Scan base plate
Next
button.