4.4.3 Pc Type T3610; Installation; Transport; Setting Up - IDC S1 Mode D'emploi

The scan base plate is stationary in the desktop
scanner. The spacer plates 1 7 and 2 6 and the fix-
ation plate with clamp 5 are screwed to the base
plate as required. The choice of spacer plates and
screw 3 depend on the height of the model to be
scanned.

4.4.3 PC type T3610

1
2
3
Fig. 4
1 Network connection, Internet
2 USB connections for keyboard, mouse, scanner
and dongle
3 Digital connection, monitor
4 Power supply connection, PC
5

Installation

5.1

Transport

▷ For transport, have two persons lift the equip-
ment by the floor plate.
5.2

Setting up

_ The machine is intended exclusively for use
within dry, closed rooms.
_ Minimum space requirements for the desktop
scanner (incl. connections):
▪ Width: 420 mm
▪ Depth: 475 mm (excl. connection cable)
▪ Height: 540 mm
_ The set-up surface must withstand a load of
35 kg.
_ During operation, the room temperature must
be between 15 °C and 30 °C; avoid large varia-
tions in temperature.
▷ Set up the machine on a sturdy work table or
work bench (off the ground and clear of walls;
this is important due to natural oscillation).
▷ The opening of the scan chamber must face
away from windows and strong artificial light-
ing.
▷ Adjust the height of the machine by screwing
the feet in or out, ensuring that the machine is
positioned firmly on all four feet.
4
5.3

Installation of the PC

▷ Connect the mains cable to the power supply
connection of the PC as well as to a mains
socket outlet.
▷ Connect a network cable to the network connec-
tion of the PC and the Internet router/modem.
▷ Unplug the blue VGA cable (analogue) from the
monitor.
I N S T A L L A T I O N
E N
31