Reset: Restore Factory Defaults - Tripp-Lite B002-DP1A4 Manuel De L'utilisateur

Miscellaneous KVM Functionality

RESET: Restore Factory Defaults

Note: The following steps are intended for the system administrator.
Restore Factory Defaults will reset all settings on the KVM to their original
state:
• KVM mode
• CAC port registration will be removed
• KVM settings will be reset to factory defaults
To Restore Factory Defaults, follow the steps below.
Note: Only one computer connected to port 1 is required for this operation.
1. Open the Administration and Security Management Program (See the
EDID Learn section for download instructions). The Administration and
Security Management screen will appear.
18-06-346-933846.indb 20
20
8/14/2018 5:53:59 PM