Km Switching; Single-Head Mode Km Switching - Tripp-Lite B002-DP1A4 Manuel De L'utilisateur

KM Switching

Note: KM switching is not applicable to KVM models with only one video console port.
After connecting all devices to your B002-Series Secure KVM Switch, a
display mode and display topology configuration must be selected. By
default, the B002-Series Secure KVM Switches are configured to Single-
Head Display Mode and a topology with four screens arranged horizontally,
starting with Port 1.
Note: If one or more of the input computers have multiple displays, Multi-Head Display
Mode must be selected. Otherwise, select Single-Head Display Mode.
The table below shows Display Mode keyboard hotkey commands:
Commands
Single-Head Sisplay Mode
Multi-Head Display Mode

Single-Head Mode KM Switching

In addition to traditional channel switching by buttons located on the front
panel, KM also supports cursor control of selected channels. This technology
allows seamless switching between computers by moving the mouse cursor
from one display to another. Users can effortlessly switch computers for
faster productivity.
1. KM functionality for KVM devices is only available once the device has
been put into KM mode, refer to admin tool guide for detail.
2. When the device is placed into KM mode, it will behave identically to the
KM models of the product.
3. The major difference when the device is placed into KM mode is that
cursor control of selected channels is available as an additional method
to switch the connected computer.
18-06-346-933846.indb 10
Hotkeys
CTRL+CTRL+K+S
CTRL+CTRL+K+M
10
8/14/2018 5:53:59 PM