Assembly Procedure; Important - Grill Chef 05892 Mode D'emploi

Assembly procedure

CAUTION!
For your safety the screw heads should always
point outwards, otherwise there is a risk of
injury.
Only tighten all of the screw connections firmly
when you have finished assembly otherwise
undesired material stress may result.
1. Secure the bucket (5) to the frame (6) by using
M5x10 bolts and wing nuts.
2. Unfold the feet underneath the fire bowl (4).
3. Place the fire bowl (4) into the bucket (5).
4. Insert the handle (1) into the two upper holes
in the bucket (5).

Important:

➱ Remove the carrying handle every time before
using the barbecue.
➱ Before re-attaching the carrying handle make
sure that the barbecue has cooled down
completely.
5. To ensure a secure seating the three
hooks on the cooking grill (2) must be
positioned over the rim of the bucket.
6. To remove the cooking grill (2) insert the
accompanying grill handle (3) and lift the
cooking grill (2) off carefully.
Information for safe operation of the
barbecue
The barbecue must be positioned on a stable and
secure surface when it is in use.
Do not use in enclosed areas or on covered areas.
Only use safe lighting materials (such as
LANDMANN solid firelighters).
WARNING!
The barbecue must be positioned on a stable
and secure surface when it is in use, otherwise
it may tip over.
The fuel container has a capacity of approximately 0,5
kg.
Before using the barbecue for the first time, it should
be heated with fuel (charcoal or briquette) for
approximately 30 minutes.
GRILLCHEF
9