ADE KE 1824 Mode D'emploi page 27

‚ Before the first use, you should clean the
‚ Each touch of TARE or UNIT is confirmed
Weighing
1. Place the weighing station on an even, firm and dry
surface. Carefully position the scale in order to avoid
hard shocks to the sensors/feet and therefore any
damage.
2. Place the measuring cup on the weighing surface of
the weighing station.
The scale has an auto tare function. When
the measuring cup is placed on the weighing
surface, the scale is automatically set to zero
via a small contact switch; the measuring cup
is therefore not weighed from the outset.
If the function is active, a small cup symbol
appears on the display.
3. Press TARE.
The display shows "HI", shortly afterwards "0" and the
set unit of measurement.
4. Choose the desired unit of measurement by repeatedly
touching UNIT.
You can choose between "g" (gramme), "oz" (ounce),
"ml" (millilitre) and "CUP" (cup). Please note the display.
measuring cup; see "Cleaning".
by a beep.
27